Rhodium Plating
Rhodium plating is the galvanic coating of silver or white gold with a thin layer of rhodium. It gives a cool, bright colour and a shine, and on silver it also protects against tarnish. The layer is thin, so it wears with time and is then renewed as a service.
What rhodium plating is
Rhodium is a platinum-group metal. It is applied galvanically, that is in a bath with an electric current in which a thin layer deposits on the surface. The coating is white and hard-wearing, which is why it is used on silver, where it protects against tarnish, and on white gold, where it evens out the colour. On the finished piece you then see the rhodium, not the alloy underneath.
When rhodium plating makes sense
White gold takes its colour from the alloying metals, while rhodium gives the piece a uniform, bright colour. On 925 silver the coating delays tarnish, which sulfur in the air causes. Yellow and rose gold usually stay unplated, because a white coating would change their colour. When a change of colour is exactly the aim, yellow or rose gold plating is used, working on the same principle.
Plating in casting and in renovation
In the precious metal casting service a galvanic coating can be added to the jewellery finish: rhodium, yellow gold or rose gold plating. The coating goes only on a polished surface, because plating reproduces whatever lies beneath it. An engraving ordered together with plating is done before it, so the mark stays visible under the layer. In renovation, rhodium plating of white gold or gilding of silver is an option on top of cleaning and polishing, and the full package combines cleaning, rhodium plating and a check of the stone settings.
How to care for rhodium-plated jewelry
A soft microfiber cloth after wearing and a gentle wash in warm soapy water are enough. Rhodium-plated silver is not cleaned with abrasive pastes: they wear away the thin rhodium layer and expose the alloy. If the coating does disappear from the most exposed places, this does not mean the piece is faulty. The layer can be applied again.
Common mistakes
The most frequent misunderstandings:
- expecting the coating to be permanent: it is a thin layer that wears with time and is renewed as a service
- polishing a rhodium-plated surface with abrasive pastes
- plating a rough or matte surface, because the coating will not hide flaws, it will reproduce them
- believing that rhodium raises the value of jewelry: it does not, because the value of the metal comes from the gold content of the alloy
Frequently asked questions
Does rhodium plating wear off?
Yes. It is a thin galvanic layer that wears with time, especially in places exposed to friction. It is renewed as a service.
Can both silver and gold be rhodium-plated?
Yes, rhodium is used on silver and on white gold. In the casting service rhodium gives a white finish on silver and gold, but only with the jewellery finish.
Does rhodium plating increase the value of jewelry?
No. White gold 585 holds exactly as much pure gold as yellow 585, and a rhodium coating adds no value.
What should I use to clean rhodium-plated silver?
Just a soft cloth and, if needed, warm water with mild soap. Avoid abrasive pastes, because they wear the coating away.
Jewelry renovation
We restore the shine without changing the character.
from €19.06