Studio

Casting Shrinkage Compensation

Casting shrinkage compensation means scaling a CAD model up before printing by a factor matching the alloy's shrinkage as it solidifies. Metal shrinks as it cools, so the casting comes out smaller than the pattern. A model scaled up in advance gives a finished piece of the target size.

Where shrinkage comes from

Liquid metal takes up more volume than the same metal once solid. The casting is therefore slightly smaller than the cavity it filled, and the cavity has the size of the pattern. Shrinkage depends on the alloy, not on the shape of the piece, which is why every alloy has its own factor. The pattern is printed larger than the finished piece by that factor.

Alloy factors

We keep the factors in one table, used by the shrinkage calculator, the ring generator and the mass estimate. That way each of them calculates the same way. The current values are below.

AlloyModel multiplier
Silver 800x1.017
Silver 925x1.016
Au 9Kx1.021
Au 585 (14K)x1.0196
Au 750 (18K)x1.018

From finished size to model size

The calculation always follows the same chain: finished size, minus the allowance, times the shrinkage, gives the model size. The allowance is metal that will disappear during grinding. We always grind the bore of a band, and grinding enlarges the bore, so the model must have a bore smaller than the target and the allowance is subtracted. On an outer surface for a mirror polish the allowance is added, because grinding removes material from outside. Decorated surfaces, meaning texture, hammering, engraving and relief, never receive an allowance, because grinding would take the pattern away.

Example: the bore of a 925 silver band with a target diameter of 17 mm: 17 mm minus 0.15 mm allowance gives 16.85 mm, times 1.016 gives 17.12 mm in the model.

The costliest mistake: double compensation

If someone scales a model up for shrinkage and the foundry scales it up once more, the piece comes out two to four sizes too large, and the metal, the flask and a day of kiln time are lost. That is why, for casting from a file, we do not ask about it with a tick box that can be clicked without reading. You have to state the state of the file: finished dimensions, or a model already scaled up. In the second case you name the alloy it was scaled for, and we add only the difference against the alloy ordered. We do not accept your own multiplier, because a typo in a text field would then have no way to reach the piece.

Limits of the calculation

Shrinkage is not the only source of discrepancy. When the bore measured in the file differs from the stated finger size by more than the process tolerance, we stop the order and ask, because boring out a bore takes away the thickness of the shank and must not be done without agreement.

Common mistakes

What to watch for:

  • no compensation, so the casting comes out smaller than the design
  • double compensation of a file that is already scaled up
  • the factor of the wrong alloy, for example silver instead of gold
  • a missing allowance for grinding the bore, which makes a band come out too loose
  • an allowance on a decorated surface, which grinding then takes away with the pattern

Frequently asked questions

What is casting shrinkage compensation?

It is scaling a model up before printing by the alloy's shrinkage, so the finished casting reaches its target size. Without it the casting comes out smaller than the designed model.

Do I have to scale the model up myself?

No. Give the finished dimensions and we add the rest. If the model is already scaled up, name the alloy it was scaled for so the shrinkage is not applied twice.

By how much should a model be scaled for silver and for gold?

The factor depends on the alloy. The values for Ag 925 and for gold are in the table on this page and in the shrinkage calculator.

Why is the bore in the model smaller than the target?

Because we grind the bore after casting, and grinding enlarges it. The metal that will disappear has to be left in the model as an allowance.

We can make it for you

Precious metal casting

Pattern, 3D model or idea. Silver and gold, our metal or yours.

from €180.43