CO2 laser cutting
Shapes from a vector file: plywood, acrylic, leather, felt.
Configuration and pricing below, without leaving this page.
A service performed to your specification, the right of withdrawal does not apply once work has begun. Terms of Service
About this service
Laser cutting gives an edge you will not get with a saw or a router: no tear-out, no sanding needed, tracing the drawing to a tenth of a millimetre. That makes it the right tool for openwork parts, templates and packaging.
The price follows the total cutting path length and the complexity of the pattern, because those translate into machine time. A simple shape cuts faster than a lace-like one of the same area.
In clear acrylic the cut edge comes out transparent and polished, which we often use for backlit elements.
The price above covers labour only. You can supply your own material or order it from us, choose it in the configurator below.
Specification
- Machine
- xTool P2, 55 W CO2
- Work area
- 600 × 288 mm
- Plywood
- 3, 5 and 8 mm
- Acrylic
- 3, 5 and 8 mm
- Accuracy
- ± 0,1 mm
How it works
- 1You send a vector
SVG or DXF. If you only have a drawing, we can prepare the vector for a surcharge.
- 2We nest on the sheet
We arrange the parts to fit as many as possible and cut material cost.
- 3Cutting and edge check
We check for scorching and clean the edge if needed.
Configure and add to cart
The drawing does not change the price, the selected engraving area does. It travels to the workshop with the order.
What we engrave on
The amount above covers the engraving alone: machine time, file preparation and handling. The material the design is made on is a separate item, agreed at the production stage, because a board, a bottle and a strap are three different costs.
You may supply your own material. We would then need a sample for a material test: the same laser gives a different contrast on two boards of the same species, and an unknown plastic can release chlorine when burned.
InPost parcel locker JUZ04M
By courier or post as an exception, from abroad and where InPost does not deliver: AEJaCA, ul. Nowy Świat 33 lok. 13, 00-029 Warszawa, Poland. contact details
Be specific. „Something wooden” means an exchange of emails before anything starts.
Before you order
Check before you order
Guides
Laser Cutting & Engraving Materials - What Works?
Overview of CO2 and Fiber laser materials: wood, acrylic, leather, metal, glass, stone. Thicknesses, limitations, and pricing at AEJaCA sTuDiO.
3D Printing Step by Step - From Idea to Product
How does 3D printing work? FDM vs resin, from file to print, pricing, materials. A complete guide to 3D printing services at AEJaCA sTuDiO.
Laser Engraving - Materials, Techniques & Uses
CO2 vs fiber laser, which materials can be engraved, applications, pricing. A complete guide to laser engraving services at AEJaCA sTuDiO.